Patrick Adair Designs....!

About 20 results out of 2104 (0.23 seconds)
    

Channel Title : Patrick Adair Designs

Views : 28686

Likes : 1791

DisLikes : 38

Published Date : 2019-03-16T21:21:05.000Z

Today I use both my lathe and mill to make a steampunk ring with a more complex design than usual. But the material selection is super simple - just pure bronze. I used a blow torch and motor oil to give it dark finish, then I give it a distressed/worn look by sanding away some of the oxidation. Overall I think the ring has a really nice look to it and I love the patina it has. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 5404245

Likes : 263881

DisLikes : 16755

Published Date : 2019-01-05T17:37:59.000Z

In this video, I make a ring out of a custom block of micarta that I made to look like PewDiePie's red and black swirl pattern that he uses frequently. I integrated an NFC chip into the ring and programmed it to subscribe you to PewDiePie and unsubscribe you from T-Series. This video was mostly for fun and to support the C.R.Y. charity, I hope you enjoy it! My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 41648

Likes : 2119

DisLikes : 22

Published Date : 2019-02-26T21:33:03.000Z

Today I make the Evergreen ring. Today's video was a little different. My first material choices for the ring didn't turn out exactly as I had envisioned, so I spent the next couple of weeks refining the design. At the end of the video I showed off the 5th iteration of the ring which is the final design we settled on. Here's the final material list: cobalt chrome blank, genuine emerald, micro malachite fragments, and black emerald opal. We replaced the marble with malachite for its lighter color, and we used smaller pieces for the inlay to give it a more consistent look. We made the glow powder darker so we also used a darker emerald to match. Finally I replaced the opal from a type that gives off several colors including an orange and red range, to "black emerald" opal that gives off a nice green-blue hue. My Ring Website (where you can purchase the evergreen ring): https://patrickadairdesigns.com/products/the-evergreen-cobalt-chrome-ring My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 327829

Likes : 12144

DisLikes : 198

Published Date : 2019-02-10T23:16:18.000Z

Get your first audiobook free when you try Audible for 30 days visit https://www.audible.com/patrickadair or text patrickadair to 500 500 Thanks so much to Matthias for supporting me and working with me on this project. I also really liked this ring, gold is a fantastic material to work with and it holds its polish forever! Gold wedding rings are the way to go. Also I really like how I was able to incorporate the super vibrant Dope or Nope colors while keeping the overall design fairly subtle. Also it glows so there's actually a lot going on in this ring even though you wouldn't expect it based on the tradition yellow gold shell. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 565114

Likes : 16027

DisLikes : 174

Published Date : 2018-02-08T20:49:44.000Z

In today's video Patrick Adair designs a glowstone ring made of an incredible material called Spirograph Damascus Steel. Damascus steel is when you forge multiple types of steel together in order to create interesting patterns. It's a fairly basic concept, but in order to create beautiful patterns and a rod that actually holds together, it requires an insane amount of patience and experience. Buy the ring in the video here!: https://goo.gl/CDZtRE Vegas Forge creates this beautiful exotic materials and they were nice enough to send us the Spirograph Damascus Steel to make this video. Vegas Forge's website: https://goo.gl/y3uRwb My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram (comment on my photo of the ring in this video "I love @crazyrussianhacker" in the next 48 hours to be entered to win a $20 Amazon giftcard): https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, has a youtube channel too!: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 493293

Likes : 10807

DisLikes : 322

Published Date : 2018-06-30T14:20:29.000Z

We made the "Ring of Random" in today's video ;) This was a fun project that I worked on with Grant and Nate from The King of Random channel. We used brass bullet shells and meteorite fragments to create a composite metal used for the rings in this video. Here's a link to the GIVEAWAY: https://gleam.io/EUYAC/king-of-random-ring-giveaway Here's a link to PART 1 of this video: https://youtu.be/kuT2X_P8BgQ ________________________________________________________________________________________ MY RING WEBSITE: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX ____________________________________________________________________ You can follow Dustin (the video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 1057122

Likes : 26453

DisLikes : 1383

Published Date : 2018-09-11T18:01:10.000Z

In today's video, Patrick Adair designs a ring made out of forged carbon fiber with a groove cut into it to fit an NFC antenna. He also filled in the rest of the groove with circuit board components, glow powder, and tritium vials. The ring allows you to perform a bunch of really useful functions with your smartphone, so this is definitely one of the most functional rings that Patrick has ever made. Stay up to date with the Forged Carbon NFC Smart Ring here: https://patrickadairdesigns.com/pages/nfc-smart-ring This will let me keep you in the loop as I design a way to make these faster so that I can sell them for a reasonable price! Special thanks to John from Carbon 6 Rings for the forged carbon fiber used in this video! BUY A HANDMADE RING HERE: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX You can follow Dustin (the video guy) here: https://goo.gl/f1P9Rk Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 1009052

Likes : 16306

DisLikes : 491

Published Date : 2017-11-08T14:58:12.000Z

This week Patrick Adair is making a pair of diamond dust glow rings. These rings combine the luxury of diamond with the excitement of our standard glowstone rings. My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Check out the first video: https://goo.gl/nuKQMj Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. https://patrickadairdesigns.com/blogs... My dude Lewis's Instagram where he showcases the ridiculous amount of caffeine it takes to produce one of these videos: https://www.instagram.com/lewiswf ____________________________________________________________ Music: Codeko - Crest
    

Channel Title : Patrick Adair Designs

Views : 52603

Likes : 2300

DisLikes : 67

Published Date : 2019-02-18T02:13:02.000Z

To enter the giveaway follow my personal Instagram account and comment on the giveaway post: https://www.instagram.com/p/BuAYTCvh0Uj/?utm_source=ig_share_sheet&igshid=473us7eb3acs Today I make a ring using mostly hand tools out of solid dinosaur bone. This fossil is over 150 million years old and the patterns it has look incredible, especially on this simple ring's shape. This would be a great project to try at home if you're looking for a simple ring to get started making rings. I've got links to all the tools you'll need here: Diamond Hole Saw Set: https://amzn.to/2tsr7J7 Diamond Dremel Accessories: https://amzn.to/2BDZdP2 Dinosaur Bone Slab: goo.gl/azfUaC (I'd recommend starting on a cheaper material if you're learning) Thin CA Glue: goo.gl/qEPo2E My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 11119841

Likes : 210342

DisLikes : 6109

Published Date : 2017-11-30T16:00:01.000Z

In this video, Patrick Adair is making a new style of superconductor ring. This ring is made by starting with superconductor blank and then sanding an obsidian facet onto it before acid etching the ring to create a beautiful new style. My Website: https://patrickadairdesigns.com/ Shop for ring supplies here: https://bit.ly/2yPhGpC Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Head over to bangleguy's website if you're in need of a ring mandrel: http://www.bangleguy.com/page/page/8464584.htm Patrick Adair Designs Blog: https://goo.gl/H6gGzE If you just can't get enough of Patrick Adair Designs, follow my dude Lewis for an extra behind the scenes look: https://goo.gl/AigT6H
    

Channel Title : Patrick Adair Designs

Views : 107035

Likes : 4299

DisLikes : 53

Published Date : 2018-11-03T17:31:38.000Z

Today I make a ring of two special materials. I start with superconductor that has smaller micro-filaments giving it a more premium look, then I add a solid 18k rose gold liner to the ring. The rose gold will never tarnish, will protect my finger from discoloring due to the copper oxidizing, and gives the ring a really nice weight. The creation process of this ring was fairly straight-forward. I didn't even use my drill press, I did all the drilling with my lathe. I'm fairly new to gold jewelry, so this was a super fun project to do (even though the thought of ruining a $500 piece of gold is really scary haha). Superconductor is famous for its ability to levitate or 'maglev' when super-cooled, but it also looks incredible so I use it in my rings! My Ring Website (where you can order this ring): https://patrickadairdesigns.com/products/superconductor-with-rose-gold-liner My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 282810

Likes : 10239

DisLikes : 135

Published Date : 2018-04-27T16:40:28.000Z

In today's video, Patrick Adair designs an Infinity Gauntlet ring to celebrate the release of Marvel's Avengers: Infinity War. It is meant to look like a ring version of Thanos's gauntlet from the movie. After doing this ring we really want to try more Avenger's rings, maybe a Thor or Captain America ring? Let us know what you think in the comments. BUY (or look at) THE INFINITY RING HERE: https://goo.gl/7yj8kk STERLING'S INSTAGRAM: https://goo.gl/D3eigP STERLING'S WEBSITE: https://goo.gl/EKxJTv MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX _______________________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 281768

Likes : 8939

DisLikes : 171

Published Date : 2018-06-20T00:00:02.000Z

In today's video, Patrick Adair designs a copper ring inspired by treasure found in shipwrecks. This ring features a unique hammered finish and a blue patina formed from oxidation. PRE-ORDER THIS RING: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX ____________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 51255

Likes : 2348

DisLikes : 16

Published Date : 2018-10-06T18:10:28.000Z

Huge thanks to The Opal Dealer for sponsoring today's video! USE CODE: “PATRICKADAIR” FOR 10% OFF THEIR ENTIRE SITE! Here's a link to their website: https://goo.gl/Z9uP5q Thanks for watching guys! In today's video, I make a bunch of different glowstone rings that all integrate opal. I used a ton of other materials in combination with the opal to make some awesome new designs. I used meteorite, amethyst, turquoise, copper, diamonds, and (of course) glow powder. BUY A HANDMADE RING HERE: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX You can follow Dustin (the video guy) here: https://goo.gl/f1P9Rk Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 67071

Likes : 2605

DisLikes : 33

Published Date : 2018-12-21T19:13:28.000Z

I worked with the Waterjet Channel to make a fluorescent Michigan Yooperlite glowing stone ring. Yooperlites are rocks that glow orange under a UV light because they contain a fluorescent mineral called sodalite. I love working with organic materials, they always have a super interesting cross section. This ring was especially challenging due to the fragile nature of Yooperlite. I wasn't able to use my lathe, so this ring was made completely by hand! Check out the Waterjet Channel's video here: https://youtu.be/HhHz56o5E8g My Ring Website : https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX #PatrickAdairDesigns #Yooperlite #YooperliteRing
    

Channel Title : Patrick Adair Designs

Views : 93335

Likes : 2527

DisLikes : 38

Published Date : 2018-01-28T21:40:45.000Z

In today’s video Patrick Adair designs a ring made out of carbon fiber that has been infused with titanium and then adds a liner made from a glow rod. The three materials combine to make a ring with an insane amount of contrast. The bright red on the glow liner stands out from the pitch black carbon fiber and the titanium adds a shimmer that stands out amongst the dark waves of the cross-cut carbon fiber. CarbonWaves carbon fiber: https://goo.gl/BcTL0N My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, got his hair cut with a waterjet, you should check it out: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 65935

Likes : 2565

DisLikes : 34

Published Date : 2018-08-04T18:07:27.000Z

Join the Club for only $5: http://www.dollarshaveclub.com/patrickadair Thanks to our sponsor Dollar Shave Club, new members get their 1st month of the Daily Essentials Starter Set including trial-sized versions of their Body Cleanser, One Wipe Charlies’ Butt Wipes, and Shave Butter along with their Executive Razor for ONLY $5 with FREE shipping. In today's video, Patrick Adair designs a star dust ring using crushed diamonds, moonstone, meteorite shavings, and aqua glow stone. The end result is meant to look like a ring that was crafted from the debris of a massive cosmic explosion. The 'Star Dust' mix is inlayed into a Cobalt Chromium ring blank to top off the insane combination of materials that is the Star Dust Ring. BUY THE STAR DUST RING HERE: https://patrickadairdesigns.com/collections/special-edition-glowstone-rings/products/star-dust-ring MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 77409

Likes : 2508

DisLikes : 60

Published Date : 2018-12-03T22:21:34.000Z

In this video, Patrick Adair Designs a resin cast ring made up of a fire hose. The fire hose and resin are dyed various colors. This is a unique ring. Featuring a variety of amazing patterns, this resin ring is reminiscent of colored carbon fiber rings. Making a resin ring is a great DIY craft to do if you have access to a drill press and a lathe. My Ring Website (where you can order this ring): https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX #PatrickAdairDesigns #Resin #FireHoseRing
    

Channel Title : Patrick Adair Designs

Views : 52395

Likes : 1972

DisLikes : 24

Published Date : 2018-11-16T17:15:40.000Z

In today's video, Patrick Adair Designs a gold ring with Carbon Fi. Together they make the Heretic Ring. The Heretic ring is made using Gold Vein Truestone with a gold liner added. The Heretic Ring is a beautiful piece of handmade jewellery that is made using solid gold. It makes a perfect wedding band, wedding ring, or engagement ring making this luxury ring the best jewelry. Jewelry making is a great way to use a lathe as an alternative to pen turning and pen making. This video shows you how to make jewelry so you can do it yourself! Check Out Carbon Fi: Carbonfi.com 20% off both sites with code: CARBONPAD My Ring Website (where you can order this ring): https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX #PatrickAdairDesigns #HereticRing #GoldRings
    

Channel Title : Patrick Adair Designs

Views : 2032257

Likes : 50679

DisLikes : 1625

Published Date : 2018-03-29T23:59:18.000Z

In today's video, Patrick Adair designs one of his most ambitious rings to date. This ring is tritium (a radioactive form of hydrogen) gas cased in glass and then mounted in a custom Damascus steel band. This radioactive tritium and Damascus steel ring is one of the most complex rings Patrick has ever made! Do you want a cool custom ring? Click Here: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX _______________________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 53496

Likes : 2203

DisLikes : 32

Published Date : 2018-07-23T21:15:01.000Z

Start your free trial today at squarespace.com/patrickadair and get 10% off your purchase with offer code: PATRICKADAIR In today's video, Patrick Adair designs a ring meant to replicate the look of the original shipwrecked ring that was made out of pure copper. This one glows and is surrounded with a tungsten carbide core giving it a completely different style while maintaining a similar look. This is the easiest way to make a shipwrecked glowstone wedding ring. ORDER THIS RING HERE: https://goo.gl/UzCKWk MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 92710

Likes : 2475

DisLikes : 74

Published Date : 2018-04-06T20:49:28.000Z

In today's video, Patrick Adair designs a bentwood ring. These rings are an amazing DIY project to get started in ring making because this bentwood DIY ring project can be done for basically free. This makes it the perfect DIY ring project! Do you want a cool custom ring? Click Here: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Zebrano Wood Craft's YouTube Channel: https://www.youtube.com/watch?v=TYkAUDYG1hA&t=1s _______________________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 370074

Likes : 7331

DisLikes : 692

Published Date : 2017-09-23T14:00:01.000Z

My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX This week Patrick Adair Designs a ring made from a brand new iPhone 8. This was made possible by the waterjet channel cutting the iPhone for us. Be sure to check out their video and giveaway of a ring made from an iPhone 7: http://bit.ly/2wNyfPq Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! https://patrickadairdesigns.com/blogs/blog/iphone-8-ring You can also buy a slightly used iPhone 8 on eBay right now (it was only out of the box for 2 hours!): http://ebay.to/2xpeGzb My dude Lewis's Instagram: https://www.instagram.com/lewiswf Andrew's Instagram: https://www.instagram.com/andy_je/
    

Channel Title : Patrick Adair Designs

Views : 687296

Likes : 11662

DisLikes : 478

Published Date : 2017-04-25T18:00:01.000Z

Tune in to watch local Utah hipster Patrick Adair make a ring from pure meteorite. Is making a ring this hipster possible? Tune in to find out! I was completely stunned at how beautiful this ring turned out. Click here to purchase a meteorite ring that's handmade by me: https://goo.gl/MWtt92 (use coupon code "youtube15" for 15% off your order) This ring was made out of a solid piece of Muonionalusta Meteorite. If you would like to know a bit more about meteorite you can checkout the wikipedia page for it here: https://en.wikipedia.org/wiki/Meteorite My website where you can purchase custom rings made by me: http://patrickadairdesigns.com/ SECRET FOR MY YOUTUBE VIEWERS: You can get 15% off any order on my website by using code "youtube15" at checkout on my website Check out my Instagram to see all of my work: https://goo.gl/MpnhKq If you're interested in supporting my channel and getting exclusive rewards in return, then check me out on Patreon: https://www.patreon.com/patrickadair LIST OF JUST ABOUT EVERYTHING YOU'LL NEED TO START MAKING RINGS: (By using these links to purchase supplies, you'll be supporting my channel because Amazon gives me a small referral bonus on every purchase you make using my links to their site. You can change your bookmark for Amazon to this link: http://amzn.to/2kyp3gP and every time you use the link I will get paid by amazon for everything you purchase within the next 24 hours.) LINK TO GET FREE AMAZON PRIME TRIAL SO YOU CAN GET FREE SHIPPING ON EVERYTHING: https://www.amazon.com/tryprimefree?&... LATHE: http://amzn.to/2lgqflZ DRILL PRESS: http://amzn.to/2lUbfgT CARBON FIBER: https://goo.gl/BcTL0N or https://goo.gl/j4HH44 DUST MASK (Please always use one when working with carbon fiber or other materials that make a lot of dust): http://amzn.to/2ltj7oC RING BLANKS (The cheapest way to get these is to order one of these rings and just remove the inlay and replace it with your own): http://amzn.to/2o3xtK1 EXPANDING RING MANDREL: https://goo.gl/WlnvSn DIAMOND HOLE SAW KIT: http://amzn.to/2lglwka SANDPAPER: http://amzn.to/2lglCbw EXTRA SANDING DRUMS FOR DREMEL (you'll use a lot): http://amzn.to/2lgotl2 POLISHING COMPOUND: http://amzn.to/2l479Bf DIAMOND POLISHING COMPOUNG (great for hard materials like tungsten): http://amzn.to/2oo5F4W CLAMPS: http://amzn.to/2ltl4BV ELECTRIC TAPE: http://amzn.to/2kI27qD RING SIZER: http://amzn.to/2lgtBpi STRONTIUM ALUMINATE (glow powder): Search eBay for it, I buy it from a user named Krypto-Nyte (link to his eBay store: http://goo.gl/YthkjF) you can also purchase it at http://technoglow.com COLOR PIGMENT (This is what I use to colorize glow powder): http://amzn.to/2kIcryK Songs used: Defqwop - Heart Afire (feat. Strix) [NCS Release] https://www.youtube.com/watch?v=gJeh_dLjPN4 Silent Partner - Grass Syn Cole - Feel Good [NCS Release] https://www.youtube.com/watch?v=q1ULJ92aldE
    

Channel Title : Patrick Adair Designs

Views : 37681

Likes : 1881

DisLikes : 32

Published Date : 2019-01-31T21:21:56.000Z

Today Patrick Adair Designs and Tyler Wright from Carbon Fi team up to show the world how the Aurora carbon fiber glow ring is made. Here's a link to the Kickstarter campaign: https://www.kickstarter.com/projects/designsbycarbonfi/aurora-carbon-fiber-lume-infused-carbon-fiber?ref=e3txpy Tyler flew up from Arizona to make a few videos with me. This is our second video and it was a ton of fun to make! We used a sheet of his proprietary glow carbon fiber to make a ring in record time. This would be a perfect ring technique for beginners to try at home, there aren't a lot of steps involved, and the tools required are fairly simple. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 1970446

Likes : 36656

DisLikes : 705

Published Date : 2017-09-13T15:11:13.000Z

Today, Patrick is making a resin cast ring with glowing flowers inside. This is one of the most stunning rings he's ever made. My Website: https://patrickadairdesigns.com/ Buy ring supplies to make your very own rings: https://bit.ly/2yPhGpC Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX https://patrickadairdesigns.com/blogs... The Instagram of my amazing video editor who edited until 6 AM to get this uploaded on time: https://www.instagram.com/lewiswf
    

Channel Title : Patrick Adair Designs

Views : 42046

Likes : 1424

DisLikes : 24

Published Date : 2018-11-21T22:36:04.000Z

In this video, Patrick Adair Designs a ring with fordite shavings. This ring is made out of detroit agate and resin using resin casting. This is a great recycled craft from when Patrick originally made the fordite and titanium rings along with the fordite and carbon fiber. Jewelry making is a great way to use a lathe as an alternative to pen turning and pen making. This video shows you how to make jewelry so you can do it yourself! My Ring Website (where you can order this ring): https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX #PatrickAdairDesigns #Resin #ResinArt
    

Channel Title : Empire Rings

Views : 3182

Likes : 49

DisLikes : 3

Published Date : 2018-01-17T12:20:06.000Z

    

Channel Title : Patrick Adair Designs

Views : 38329

Likes : 1879

DisLikes : 14

Published Date : 2018-10-13T21:35:38.000Z

My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 65119

Likes : 2226

DisLikes : 30

Published Date : 2018-10-27T15:51:58.000Z

In today's video, Patrick Adair designs a ring made entirely out of fordite (also known as corvettite, detroit agate, or just car paint! haha). The end result displays an incredible pattern of the hundreds of layers it takes to make each ring. He also made variants of this ring that are supported by carbon fiber and titanium, they are available on the website. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Designs

Views : 79763

Likes : 3752

DisLikes : 137

Published Date : 2019-01-19T19:46:45.000Z

To celebrate 500k subs I wanted to make a ring that integrated actual pieces of my 100k silver play button that YouTube sent me last year. Since YouTube doesn't have a reward for 500k subscribers I wanted to make my own reward. So I used my actual play button, real gold and silver fragments, some loose diamonds (10 million here we come???? ;) ), and a few other ingredients to make the ultimate Patrick Adair Designs play button ring. My Ring Website (where you can purchase the play button ring): https://patrickadairdesigns.com/products/youtube-play-button-ring My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb My Personal Instagram: https://goo.gl/DQAeWR Facebook: https://goo.gl/9R3TTX
    

Channel Title : Patrick Adair Supplies

Views : 1728

Likes : 65

DisLikes : 1

Published Date : 2018-11-02T21:52:12.000Z

Patrick and Dave from Patrick Adair Designs give you a step-by-step tutorial how to make the Blackout Ring from their online store. Subscribe to the Patrick Adair Supplies subscription box here! http://bit.ly/2UpT4xk Instagram: http://bit.ly/2Tn60Hx Main Channel: http://bit.ly/2SMEmi7 Patricks Personal Instagram: http://bit.ly/2tU3HNa
    

Channel Title : Patrick Adair Designs

Views : 154447

Likes : 4916

DisLikes : 74

Published Date : 2018-01-21T23:45:01.000Z

In today’s video Patrick Adair designs a ring made out of Timascus - which is a material made of blended and twisted titanium alloys giving it amazing patterns! Patrick switches things up in this video by adding an obsidian finish to the exterior of the ring giving the ring an awesome beveled look. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Alpha Knife Supply: https://goo.gl/HEvHrN You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, got his hair cut with a waterjet, you should check it out: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 72954

Likes : 2461

DisLikes : 54

Published Date : 2018-01-13T18:38:32.000Z

In today's video Patrick Adair designs a ring made out of wood that is over 5,000 years old! Bogwood is formed when a tree gets covered by a swamp leaving it deprived of oxygen so it takes much longer to decompose. Over all this time, the wood turns the dark black color that you see in the video. Patrick also adds carbon fiber to the inside of the ring which makes the ring incredibly strong and introduces another interesting material to an already amazing ring! You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui My Website: https://patrickadairdesigns.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX If you want to make your own rings, then check out my ring supplies website!! https://patrickadairsupplies.com/ Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, got his hair cut with a waterjet, you should check it out: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 190202

Likes : 4285

DisLikes : 51

Published Date : 2018-02-24T21:42:25.000Z

In today's video, Patrick Adair designs a meteorite ring with a custom glowing resin cast liner. The green glow liner replaces the traditional carbon fiber liner. This accents the exotic nature of the meteorite with a unique glowing accent. The resin is hand casted by Patrick allowing it to be the perfect formula of glow and daytime color. I'm doing a giveaway on my Instagram click here! https://goo.gl/Awvokb We now have expanding ring mandrels on my supply site: https://goo.gl/MmBnyg You can use the code: PREORDER10 for 10% off the entire site in honor of this! My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Facebook: https://goo.gl/9R3TTX __ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, has a YouTube channel too!: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 10835

Likes : 428

DisLikes : 5

Published Date : 2018-11-26T22:58:25.000Z

In this video, Patrick Adair Designs hosts a fan Q and A. The Q&A revolves around questions YouTube Subscribers and Instagram followers have been asking Patrick the past year. In this video, Patrick explains the tools he uses, how he got into ring making, where he gets exotic materials, and many more trade secrets. This video is a perfect watch to learn how to get into ring making and DIY projects as well as learning how to grow a business as a maker. My Ring Website (where you can order this ring): https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX #PatrickAdairDesigns #QandA #RingMaking
    

Channel Title : Patrick Adair Designs

Views : 1079556

Likes : 12331

DisLikes : 643

Published Date : 2017-11-18T16:00:05.000Z

In this video Patrick makes a timascus ring. Timascus is a titanium composite that's very similar to damascus steel. Anodizing Timascus causes the titanium to change from silver to amber then blue, purple, etc.. The Timascus is created in special ways to cause anodizing to occur in a specific pattern. Instagram: https://goo.gl/Awvokb ^^^^^^^^^^^^^^^^^Black Friday Coupon Codes^^^^^^^^^^^^^^^^^^^ My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Facebook: https://goo.gl/9R3TTX The Waterjet Channel: https://goo.gl/TS1fBt Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Link to Alpha Knife Supply (where to get Timascus): https://goo.gl/7Lxzsu My Dude Lewis will be posting a behind the scenes video of filming this after the waterjet video goes live! Follow him on instagram to know when its live: https://goo.gl/J6af9X
    

Channel Title : Patrick Adair Designs

Views : 344764

Likes : 9632

DisLikes : 133

Published Date : 2018-05-06T23:11:11.000Z

In today's video, Patrick Adair designs a ring made out of crushed lapis lazuli and blue strontium aluminate glow powder. The result looks totally natural with an added glow that almost makes the ring seem alien. MY RING WEBSITE: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX ____________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 95202

Likes : 3792

DisLikes : 39

Published Date : 2018-02-04T23:29:45.000Z

In today’s video, Patrick Adair Designs makes a ring out of a gold dollar coin for Ben. Ben is a legendary ring maker here at PAD who is responsible for making many of the meteorite rings we offer on our site. If you're looking for a fun/more simple project to try yourself then we definitely recommend trying this out! Let me know what you thought of the ring and if you'd like to see me make other videos (like this one) that are a bit different from my usual rings/designs. My Ring Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Follow my main man Lewis on Instagram for even more behind the scenes action: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 254853

Likes : 5179

DisLikes : 214

Published Date : 2018-01-19T18:39:34.000Z

In today's video Patrick Adair designs a ring made out of Mokume Gane. Mokume Gane is a composite of nickel silver, brass, and copper. It is made using techniques, that were perfected by the Japanese, in order to create a metal composite with patterns that resemble wood grain. Vegas Forge creates this beautiful exotic material and they were nice enough to send us the Mokume Gane to make this video. Vegas Forge's website: https://goo.gl/y3uRwb Buy a Mokume Gane Ring Here: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, got his hair cut with a waterjet, you should check it out: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 3956957

Likes : 52087

DisLikes : 1734

Published Date : 2017-09-20T14:00:02.000Z

In this video, Patrick Adair is making a custom carbon fiber and meteorite glowstone ring. My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://bit.ly/2yPhGpC Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Thanks for watching my dudes! Like and subscribe to see more project videos biweekly! https://patrickadairdesigns.com/blogs/blog My dude Lewis's Instagram: https://www.instagram.com/lewiswf Andrew's Instagram: https://www.instagram.com/andy_je/
    

Channel Title : Patrick Adair Designs

Views : 172077

Likes : 4534

DisLikes : 66

Published Date : 2018-03-24T19:09:10.000Z

In today's video Patrick Adair designs a resin ring made of shredded cash and 24k gold leaf. He made two versions of castings to test which one resulted in the best ring. The glow version doesn't detract from the daytime look of the ring, but really adds a cool accent to the ring at night! We now have expanding ring mandrels on my supply site: https://goo.gl/MmBnyg You can use the code: PREORDER10 for 10% off the entire site in honor of this! My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Facebook: https://goo.gl/9R3TTX __ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Patrick Adair Designs Blog: https://goo.gl/H6gGzE My main man, Lewis, has a YouTube channel too!: https://goo.gl/AigT6H Also here is his Instagram: https://www.instagram.com/lewiswf/
    

Channel Title : Patrick Adair Designs

Views : 3116985

Likes : 36324

DisLikes : 1486

Published Date : 2017-11-04T14:47:23.000Z

In this video, Patrick Adair finishes making a Green Lantern Power Ring. Making a ring this complex from one solid piece of meteorite is a huge challenge, but it turned out beautifully. My Website: https://patrickadairdesigns.com/ My Ring Supplies Website: https://patrickadairsupplies.com/ Instagram: https://goo.gl/Awvokb Facebook: https://goo.gl/9R3TTX Check out the first video: https://goo.gl/nuKQMj Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. https://patrickadairdesigns.com/blogs... My dude Lewis's Instagram where he showcases the ridiculous amount of caffeine it takes to produce one of these videos: https://www.instagram.com/lewiswf
    

Channel Title : Patrick Adair Designs

Views : 61144

Likes : 2120

DisLikes : 21

Published Date : 2018-05-24T15:47:13.000Z

In today's video, Patrick Adair designs a ring using twisted damascus steel with a meteorite and glow inlay. This ring is a reimagining of the spirograph damascus and meteorite glow ring using on of our favorite damascus materials from Vegas Forge. MY RING WEBSITE: https://patrickadairdesigns.com/ MY RING SUPPLIES WEBSITE: https://patrickadairsupplies.com/ INSTAGRAM: https://goo.gl/Awvokb FACEBOOK: https://goo.gl/9R3TTX ____________________________________________________________________ You can follow Dustin (the new video guy) here: https://goo.gl/Poi6ui Check out my Second Channel and Behind the scenes vlog: https://goo.gl/1nxfta Thanks for watching my dudes! Like and subscribe to see more project videos bi-weekly! Also be sure to head over to our blog to get a behind the scenes look at Patrick Adair Designs. Patrick Adair Designs Blog: https://goo.gl/H6gGzE Lewis is here: https://goo.gl/AigT6H and here: https://www.instagram.com/lewiswf/
    

Channel Title : Waterjet Channel

Views : 1923702

Likes : 13246

DisLikes : 1333

Published Date : 2017-07-22T16:00:06.000Z

Get 30% off any purchase with promo code WATERJET30 at checkout! http://bit.ly/PatrickAdairDesigns Subscribe to Patrick's Channel! https://www.youtube.com/watch?v=osRTD_ntDHE custom handmade rings We are back in the shop with Patrick Adair with another amazing ring design. This is one of my favorites, I was wearing this superconductor ring all day hoping he'd forget I had it. This is definitely a one of a kind ring and just looks amazing. The superconductor is from an MRI machine and is made primarily out of copper and titanium. We probably didn't need to use the waterjet cutter for this one, but we enjoy working with him and seeing the fascinating process of turning a piece of metal into a beautiful ring on his lathe. I could watch the ring making process for hours, its incredible to see it go from the process of a cross section to a beautiful custom exotic ring. Send us something to cut open!!! Waterjet Channel 735 W 200 N North Salt Lake, UT 84054 USA Follow Waterjet Channel for updates and sneak peeks at future videos! https://www.instagram.com/waterjetchannel/ https://www.facebook.com/waterjetchannel/ A Superconductor vs a 60,000 psi waterjet cutter Leave a comment with what you think we should cut open next and don't forget to subscribe! Just do it, you might as well. Music: https://soundcloud.com/chrissolita Watch some of our other videos: Windshield vs 60,000 PSI Waterjet In Slow Motion https://www.youtube.com/watch?v=X6WLlnBWCpE Bowling Pin vs 59,999 PSI Waterjet https://www.youtube.com/watch?v=gcAw-qSh74Y Tape Measure vs 60,000 PSI Waterjet https://www.youtube.com/watch?v=H7vncYE5jIc Exploding Cream Soda vs 60,000 PSI Waterjet In Slow Motion https://www.youtube.com/watch?v=xPwS-vz4StA Fireworks vs 60,000 PSI Waterjet https://www.youtube.com/watch?v=sA19HmoAi4o Waterjet For Science http://bit.ly/WJscience Sports Balls and Equipment http://bit.ly/WJsports Waterjet vs Tools http://bit.ly/WJtools Dangerous Waterjet Cuts http://bit.ly/WJdanger Slow Motion Cuts http://bit.ly/WJslowmo Waterjets Creating http://bit.ly/WJcreate Nature http://bit.ly/WJnature Best Cuts http://bit.ly/WJfbest Gross Waterjet Cuts http://bit.ly/WJgross Links might be affiliate links, and if you buy stuff from them we might make money. And that might cause us to experience happiness and to make more videos. Don’t steal our videos, if you’d like to use our video for something please contact us via email.

YouAPI-1


Facebook Page Like Box ::